Carbide Endmills

Chamfering Tool for Hardened Steels DN2HC-ATH

Dec, 2019
Allows numerically controlled (NC) automated centering and chamfering.
Long tool life even when machining hardened steel
  1. Thinning provides good biting properties.
    High defect resistance due to the blunt-angled tip
    Optimized edge shape for outstanding cutting capabilities and high defect resistance
  2. ATH coating provides long tool life, even with hardened steel.
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch SUS series EPSF / EPSM / EPSW-PN

July, 2019
Abundant lineup!
Adapt various machining from roughing to finishing.
  1. Suppressing vibration by unequal pitch geometry.
  2. Smooth chip evacuation by double gash.
  3. Improving chipping-resistance & wear-resistance by double-eccentric relief face.
  4. Smooth chip evacuation by optimized flute geometry.
  5. Improving wear-resistance and tool life by PN coating.
  • Details
  • Catalogue DownloadDownload a PDF file

Radius End Mill for Hardened Steel Epoch Deep Radius Evolution Hard-TH3 EPDREH-TH3

May, 2019
The long-awaited small diameter radius end mills have been added to the TH3 series.
Performs excellent wear resistance when cutting hardened steel and contributes to high precision machining of mold & dies.
  1. Guaranteed R accuracy for performing high-precision machining
  2. Tool design to pursue high-precision machining
  3. Coating "TH3" for hardened steel machining
  • Details
  • Catalogue DownloadDownload a PDF file

4 flutes high efficiency ball end mill EHHBE-TH3

Feb, 2019
Evolved by addopting a TH3 coating on 4-flute ball end mill for high hardened steel processing.
On high-hardened steel processing, to achieve even longer tool life.
  1. Highly efficient cutting with 4 flutes.
  2. Special edge shape in tip area improves cutting performance.
  3. TH3 Coating provides long tool life even on hardened steels.
  4. Variable Pitch geometry enables vibrations to be suppressed even for 4 flutes.
  5. Wide chip pocket improves chip removal.
  6. Available for high-efficiency side milling.
  • Details
  • Catalogue DownloadDownload a PDF file

4 flutes high efficiency ball end mill EB4HR-ATH

Nov, 2018
New rib slotting method by contouring with taper end mill.
Reduce the polishing time with direct milling.
  • Reduces machining steps occurring at tool change
  • Achieves high quality machined surface
  • Adopts ATH Coating
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Deep Ball Evolution Hard-TH3 EPDBEH-TH3

Sep, 2018
Achieves machining of hardened steel with long tool life
  • Applies newly developed next-generation hard coating "TH3"
  • Excellent wear resistance when machining hardened steel
  • New size items added (R0.05~R6.0)
  • Details
  • Catalogue DownloadDownload a PDF file

EHX End Mill series EHX

Jan, 2018
"Carbide" +"Carbide" = "High accuracy & High rigidity" Double Face Contact Type
  • Details
  • Catalogue DownloadDownload a PDF file

6 Flutes Ball End Mill for High-efficiency Finishing EPHB-PN

Sep, 2017
6 flutes specification enables finishing at feed rate of 20m/min.
  • High accuracy and long tool life
  • High rigidity design
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch High Hard Radius EHHRE-TH3

Sep, 2017
Adopt the design of indexable high-feed cutter to solid end mill. High feed cutting for high hardness steel possible.
  • Lineup of ⌀1-⌀12
  • The multi flute end mill enables high efficiency machining even in small precision molds.
  • Details
  • Catalogue DownloadDownload a PDF file

High Efficiency Finishing Solid End Mill GS4TN type

Mar, 2017
Solid end mill debuted as Special Shape series
  • High efficiency for 5-axis machining
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Combination Rib Ball ECRB-PN

Jul, 2016
A new processing method to change the common practice of rib grooving.
  • From discharge machining to cutting machining.
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch CBN High Precision Ball End Mill CBN-EHB

Feb, 2016
Achieves high-accuracy machining of hardened steels !!
  • Brand new lineup!
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Deep Evolution series EPDBE/EPDSE

May, 2015
Item addition! Lineup with a total of 618 items.
  • Launching with a reasonable price!
  • Two types of cutting conditions listed: High effciency or high accuracy.
  • Details
  • Catalogue DownloadDownload a PDF file
  • Watch Movie Open in a dialog

Epoch Deep Radius Evolution EPDRE

May, 2015
Item addition! Total 332 sizes.
  • Radius type are added for Deep Evolution series!
  • Launching with a reasonable price!
  • Minimum corner R size of 0.02mm also in lineup!
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Turbo Rib Turbo Mill ETR/ETM

May, 2015
Item addition! Small-diameter deep-cutting corner radius end mill for high-efficient machining From now on,deep cutting is ...
  • Deeper! From electrodischarge machining to direct machining
  • Faster! To higher-efficient direct machining
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Epoch Mega Feed Ball Evolution EMBE/EMBPE

Dec, 2014
Employs a strongly helical ball edge geometry to achieve reduced cutting force and improved chip removal!
  • Newly developed high helix variable pitch ball edge geometry
  • Improved heat resistance and wear resistance (ATH Coating)
  • Details
  • Catalogue DownloadDownload a PDF file
  • Watch Movie Open in a dialog

Epoch Epoch CFRP series ECH/ECX/ECN/ECW

Oct, 2014
Adopt special flute shape reduces cutting force.
  • Epoch CFRP Endmill Combination of flute shape that focuses on cutting performance and our original DLC coating achieves improved machined surface quality.
    Reducing running costs by regrinding is possible.
  • Epoch CFRP Trim cutter Use of diamond coating with excellent wear resistance realizes machining with longer tool life.
  • Details
  • Catalogue DownloadDownload a PDF file
  • Watch Movie Open in a dialog

Epoch Epoch Shining Square EPCDS

Oct, 2014
Poly Crystalline Diamond and a flute shape that increases flute rigidity enables a shiny machined surface and the maintenance of machining accuracy.
  • Poly Crystalline Diamond end mill suitable for finishing of cemented carbide.
  • High-rigidity circular-arc-shaped cutting flute enables the maintenance of machining accuracy.
  • The multiple-flute effect realizes long tool life.
  • Details
  • Catalogue DownloadDownload a PDF file
  • Watch Movie Open in a dialog

Epoch High Hard Ball EHHB

Nov, 2012
Achieves high-efficiency direct cutting of hardened steels!
  • Greatly reduces processing steps by achieving direct cutting after tempering.
  • Details
  • Catalogue DownloadDownload a PDF file
  • Watch Movie Open in a dialog

Epoch Panacea Series HGOB/HGOS

Aug, 2012
Expanded lineup! Long-shank products added!
  • New coating with amazing adhesion and wear resistance!
  • 2-flute, 4-flute square, and 2-flute ball to handle a wide range of cutting materials.
  • Can cover the entire region of past general-purpose products.
  • Details
  • Catalogue DownloadDownload a PDF file
  • Watch Movie Open in a dialog

Epoch Pencil Deep Ball Evolution EPDBPE

May, 2012
Evolution version of Pencil Deep Ball
  • New variations of neck angle and under neck length have been added.
  • Lineup with a total of 261 items.
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Deep Radius F EPDRF

Apr, 2012
Small dia. φ1~φ1.5 are added! Total 127 items!
  • Flute shape provides both rigidity and cutting performance.
  • No chattering even during high-speed machining.
  • Machined surface roughness of bottom is also good.
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch CBN End Mill series CBN-EPSB/EPSR

Jan, 2011
Epoch CBN Radius, Size expanded to a total of 46 items!
  • Additional corner R size for machining of fine corners, Full line up of short under neck lengths with high rigidity
  • Flute shape with low cutting force provides high-quality machined surface roughness!
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch MIRUS Series Type A for Aluminium Alloy EMXA

Jan, 2011
New 2-flute and 3-flute manufacture stock products!
  • 2-Flutes type : Provides stable processing even for ultra-high-speed machinig center.
  • 3-Flutes type: Provides high-efficiency processing for general-purpose machining center.
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Global Series

May, 2010
Abundant lineup with a total of 102 items covers a broad machining range.
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Mirus Series EMXR/EMXN

Sep, 2009 Square, semi-long shank types are added!!
Aug, 2009 φ16 and φ20 are added to Square, straight type!
Jun, 2009 Epoch Mirus Series New release!
Amazingly high efficiencies!
Amazing miracles!!
Amazing End Mill ! !
  • Effectively reduce vibration and achieve high efficiency!
  • Double gush guarantees high performance in vertical and horizontal feed!
  • High heat-resistant was achieved by the New TH coating.
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Advanced TH Ball series EPBTS/EPSBE-TH

Jul, 2008
Epoch TH Hard Ball Strong/Epoch Super Hard Ball Evolution
  • Uses newly developed ATH coating to enable high-efficient machining of high-hardness materials.
  • High heat resistance, High cost performance, High rigidity geometry.
  • Details
  • Catalogue DownloadDownload a PDF file

SD (DLC) Coating series

Mar, 2008
A phenomenal new coating with hardness exceeding 60GPa!
  • High hardness The hydrogen-free DLC coating infinitely close to that of diamond.
    Hardness: More than 60GPa
  • High heat-resistance temperature Impurities are low, providing high heat resistance and enabling high-efficiency machining
    Withstand temperature: 600°C
    Withstand temperature: 600°C
  • High-efficiency cutting machining Cutting machining of aluminum alloys or resins showcases the effects, with low heat generation making it ideal for dry cutting.
  • Details
  • Catalogue DownloadDownload a PDF file
  • Watch Movie Open in a dialog

HD Coating Series

Jan, 2008
HD coating :High adhesion Diamond coating
  • Long tool life and high-efficient machining of graphite, high-silicon aluminium alloys and fiber-reinforced plastics(FRP)!
  • Long Tool life not possible with conventional diamond coating!
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Aero Power Mill EAP-TH

Sep, 2007
  • Suitable for difficult-to-cut material cutting of super heat resistant alloy, titanium alloy etc.
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch TH Power Mill EPP-TH

Jun, 2007
  • Added TH Power Mill series.
  • Total of 86 items!
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Roughing EPQ-CS

Mar, 2007
  • New size added! Total of 66 items.
  • Uses New CS coating!
  • Achieves best performance for roughing difficult-to-cut materials!
  • Details

Epoch Micro End Mill TH EMM-TH

Sep, 2005
  • Surprisingly Small Dia.! Smallest Dia. 0.03mm.
  • Coating products added "Micro-TH Coating"
  • Ultra-high shank accuracy.
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Super Hard Ball EPSB

Oct, 2004
  • Double Face Effect & Back Draft Effect.
  • Ideal for materials with hardnesses higher than 55HRC.
  • Carbide to the max, Ultra high accuracy, Ultra long life.
  • Minimum size R0.05.
  • Details

Epoch TH Series CEP-TH/EPBT-TH

Dec, 2003
  • A newly developed TH Coat having an excellent oxidation-resistant property has been adopted.
  • Efficient chip flow. (TH Power Mill)
  • A new flute shape that is rigid and of good R accuracy has been adopted. (TH Hard Ball)
  • High tool rigidity and cutting edge strength. (TH Hard)
  • Details
  • Catalogue DownloadDownload a PDF file

Epoch Mega Feed Ball EMB/EMBP

Oct, 2003
  • The advantage of three flutes offers a tougher cutting edge for extended machining time whilst maintaining an excellent cutting action and improved chip evacuation. Seriously improves efficiency.
  • The edge section has always been the weak point of three-flute tools, with our new "Triangle Effect" this weakness has dramatically been improved for a more accurate precise cutting radius.
  • Unequal division effect - Stable milling is possible even for long reach applications due to the unequally spaced flutes.
  • TH Coating - Latest nano-crystal coating achieves the longest tool-life.
  • Details

Epoch CS series EPBC/EPPC-CS

Oct, 2003
  • Newly developed CS Coating of high lubrication is adopted.
  • A new geometry is adopted to ensure rigidity and excellent R accuracy (Power Ball).
  • Power Mill design with high reputation.(Power Mill).
  • Details

Epoch Fine BallEnd Mill -Migaki- EFB

Sep, 2000
  • Newly developed CS Coating of high lubrication is adopted.
  • A new geometry is adopted to ensure rigidity and excellent R accuracy. (Power Ball)
  • Power Mill design with high reputation. (Power Mill)
  • Details
AT Coated HSS End Mill

AT Coated Power Helical series HKR, HKM, HKL, HKN-AT

Jan, 2008
  • Dry cutting with high efficiency and long tool life!
  • Environmentally friendly tool. Ultra long life impossible with conventional HSS tools.
  • Details

AT Coated Fine Mill / Super Cut /Roughing FQ・RF・RQ-AT

Sep, 2007
  • Remarkable performance foe dry cutting.An environmentally-conscious tool!
  • New items have been added to the popular AT coated Roughing End Mill lineup!
  • Details
  • Catalogue DownloadDownload a PDF file
PDF files are in Adobe's Portable Document Format. To view them you need Adobe® Reader® by Adobe Systems Incorporated.